1. 2. 3. material content data sheet sales product name ipd50n10s3l-16 issued 21. september 2015 ma# ma001384120 package pg-to252-3-11 weight* 372.55 mg construction element material group substances cas# if applicable weight [mg] average mass [%] sum [%] average mass [ppm] sum [ppm] chip inorganic material silicon 7440-21-3 4.497 1.21 1.21 12071 12071 leadframe non noble metal iron 7439-89-6 0.215 0.06 578 inorganic material phosphorus 7723-14-0 0.065 0.02 173 non noble metal copper 7440-50-8 215.017 57.70 57.78 577143 577894 wire non noble metal aluminium 7429-90-5 3.859 1.04 1.04 10358 10358 encapsulation organic material carbon black 1333-86-4 1.218 0.33 3270 plastics epoxy resin - 21.319 5.72 57225 inorganic material silicondioxide 60676-86-0 99.287 26.65 32.70 266504 326999 leadfinish non noble metal tin 7440-31-5 3.787 1.02 1.02 10164 10164 plating non noble metal nickel 7440-02-0 0.091 0.02 244 inorganic material phosphorus 7723-14-0 0.000 0.00 0.02 1 245 solder noble metal silver 7440-22-4 0.100 0.03 268 non noble metal tin 7440-31-5 0.080 0.02 215 non noble metal lead 7439-92-1 3.816 1.02 1.07 10243 10726 heatspreader non noble metal iron 7439-89-6 0.019 0.01 52 inorganic material phosphorus 7723-14-0 0.006 0.00 15 non noble metal copper 7440-50-8 19.177 5.15 5.16 51476 51543 *deviation < 10% sum in total: 100.00 1000000 important remarks: infineon technologies ag provides full material declaration based on information provided by third parties and has taken and continues to take reasonable steps to provide representative and accurate information. infineon technologies ag and infineon technologies ag suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. all statements are based on our present knowledge, are provided 'as is' and may be subject to change at any time due to technical requirements and development without notification. this product is in compliance with eu directive 2011/65/eu (rohs) and contains pb according rohs exemption 7a, lead in high melting temperature type solders. company infineon technologies ag address 81726 mnchen internet www.infineon.com
|
